Description
PolySupport™ is a break away support for Polymaker Nylon 12 based filaments. It has a perfect interface with Nylon 12, strong enough to support it and easily removable by hand.
Intended for Nylon12 - so it should not be used with PolyMide™ CoPA.
Printing Temperature: 270˚C - 300˚C
Bed Temperature: 50˚C - 80˚C
Printing Speed: 30mm/s - 60mm/s
Fan: ON
Direct Drive:
Retraction Distance: 1mm
Retraction Speed: 20mm/s
Indirect Drive:
Retraction Distance: 3mm
Retraction Speed: 40mm/s
Drying Settings: 100˚C for 8h
(Only if the material has absorbed moisture)
No, PolySupport™ is a breakaway support: it requires mechanical removal.
0.5kg cardboard spool:
Spool Inner Hole Diameter: 55±1mm
Spool Diameter: 200±1mm
Spool Width: 65.6±2mm
Spool Weight: 190±7g
More data about this product
Looking to place an order less than $1,000?
Polymaker Wholesale requires a $1,000 minimum per order to unlock bulk pricing. To place orders as retail customer without any minimum please visit our retail site.
Visit the Polymaker Retail Site